COMPANY STORE

 

Store

WM51T CROWN KNIFE TOP PROFILE 11/16" X 3-1/4"
Product Number: WM51T
Product Description: WM51T CROWN KNIFE TOP PROFILE 11/16" X 3-1/4"
Crown moldings require two separate passes to produce the finished pattern. Using a bottom knife enables the operator to power feed the stock thru the machine rather than making the bottom cut on his table saw or other machining method.
When ordering knives you will notice we use a T after the order number to designate the top profile and a B after the order number to designate the back cut or bottom cut that usually is not seen but is needed to fit the mold to a wall.
When running moldings that require a bottom knife, you should run the bottom cut first so you have a flat surface to cut from. Then when you turn the board to make the top cut you still have a flat stable surface on the board resulting in better quality molding.
Woodmaster profile knives are manufactured to industry standards from 5/16-inch thick, M-2 High Speed Tool Steel. Woodmaster knives are supplied with the proper gib and balance weights AT NO EXTRA CHARGE.
Remember
When ordering knives use the comment area provided to tell us the head you intend to mount the knife in. If you are using a machine other than a Woodmaster tell us what machine you have.

Knifes can be used:
In Planer Head
In 700S2 New High Production 2-Knife Molding Head
In 700C Single knife Holder
In Belsaw, RBI, Grizzly, Jet and William & Hussey machines. Please specify.
Price: $95.00 - Add to Cart

Customers who bought WM51T CROWN KNIFE TOP PROFILE 11/16" X 3-1/4" also bought
WM51B - WM51B CROWN KNIFE BOTTOM PROFILE 11/16" X 3-1/4"
Back to Woodmaster Tools Store

Dare to Compare

Woodmaster Blog

Save Big Now

Financing